SCION xA 2004 − SECURITY WITH RKE (V3)
Section II − Installation Procedure
Page 8 of 23 pages Supplier Ref #: DIO
Issue: A 06/09/03
13. Secure the vehicle harness’ white 3P diode
connector and V3 Harness’ white 1P connector
to the vehicle harness using one medium wire
tie. (Fig. C−7)
14. Secure the 13P connectors and V3 harness to
the connector box with one large wire tie.
(Fig. C−7)
i. Arrange and secure the 13P connectors
under the connector box as shown.
15. Secure the V3 harness to the vehicle harness
with one medium wire tie. (Fig. C 7)
16. Route and attach the V3 harness’ relays to the
vehicle harness with two large wire ties.
(Fig. C−8)
17. Locate and disconnect the white 9P connector
and white 13P connector from the back side of
the driver’s side J/B. (Fig. C−9)
Fi
. C−9
STOP
13P (White)
9P (White)
J/B Back
Side View
V3 Harness
J/B
Fig. C−8
Relays (x2)
Side Cutter
Large Wire Ties (x2)
V3 Harness
Fig. C−7
Side Cutter
Large Wire Tie
13P (White)
14P (White)
1P (White)
3P (White)
Medium Wire
Ties (x2)
V3 Harness
