SCION xA 2004 − SECURITY WITH RKE (V3)
Section II − Installation Procedure
Page 9 of 23 pages Supplier Ref #: DIO
Issue: A 06/09/03
18. Plug in the V3 harness’ white 9P connectors
between the driver’s side J/B and the vehicle
harness 9P connector. (Fig. C−10)
i. Verify the connectors are plugged in
securely.
19. Plug in the V3 harness’ white 13P connectors
between the driver’s side J/B and the vehicle
harness 13P connector. (Fig. C−10)
i. Verify the connectors are plugged in
securely.
20. Secure the 9P connectors and 13P connectors
to the vehicle harness with two large wire ties.
(Fig. C−10)
21. Route the V3 harness toward the lower part of
steering wheel. (Fig. C−11)
22. Locate and disconnect the white 6P connector
from the lower part of steering wheel.
(Fig. C−11)
Fig. C−11
STOP
6P (White)
V3 Harness
Fig. C−10
Back Side
View
9P (White)
13P (White)
Bottom Side View
9P (White)
13P
(White)
Side Cutter
Large Wire
Ties (x2)
V3 Harness
J/B
J/B
