SCION xA 2004 − SECURITY WITH RKE (V3)
Section II − Installation Procedure
Page 10 of 23 pages Supplier Ref #: DIO
Issue: A 06/09/03
23. Plug in the V3 harness’ white 6P connectors
between the vehicle harness white 6P
connector and the lower part of steering wheel.
(Fig. C−12)
i. Verify the connectors are plugged in
securely.
24. Secure the 6P connectors and V3 harness to
the vehicle harness with one large wire tie.
(Fig. C−12)
25. Secure the V3 harness to the vehicle harness
with one medium wire tie. (Fig. C −12)
26. Route the V3 harness toward the right side of
steering wheel. (Fig. C−13)
27. Locate and disconnect the black 12P connector
from the steering wheel area. (Fig. C−13)
28. Plug in the V3 harness’ 12P connectors
between the vehicle harness 12P connector and
the steering wheel area. (Fig. C−14)
i. Verify the connectors are plugged in
securely.
29. Secure the V3 harness’ 12P connectors to the
vehicle harness with one medium wire tie.
(Fig. C−14)
Fig. C−13
STOP
12P (Black)
V3 Harness
Fig. C−12
Large Wire Tie
Medium Wire Tie
V3 Harness
12P
6P (White)
Side Cutter
Fig. C−14
Medium Wire Tie
V3 Harness
Side Cutter
12P
