Connect Systems Inc. - Model 9800 Page 22
PROGRAMMING THE CW ID
(Programming Area No. 2)
To enter the CW ID programming mode, press and hold button No. 2 on
the internal keypad and then simultaneously turn on the power switch.
At this point, the display will read 0.2. When you release the No. 2
button, you will see A.A.
A.A. (GOTO Any Address)
Press 'P' to start at character position 0.1., or enter the
character position number you wish to go to and then press 'P'.
Viewing or Changing Character Codes
A quick tap on 'C' will reveal (for a moment) the currently
selected character code for the displayed character
position. If the character code is acceptable, press 'P' to
advance to the next character position, or, enter a new character
code and press 'P' to advance to the next character position.
Character Code Range Checking
If a number greater than 38 is entered, pressing 'P' will not
cause an advance to the next character position. This prevents
you from accidentally entering an unusable choice.
Returning to A.A.
If desired, you can return to a previously programmed
character position by holding down 'C' for several seconds.
This will return you to A.A. Now enter the character
position (line number) you wish to return to and press 'P'.
PROGRAMMING
The CW ID message sent from the 9800 may consist of up to 15
characters. To program the message, enter the desired character codes
(from Table 1) starting at character position 0.1. through the length
of the string. If the message is less than 15 characters, it must be
terminated with code 38 (Message End). For example, to program the CW
ID message 'CSI':
0) Enter CW ID Programming Mode as explained above
(Hold down key No. 2 and switch on the power)
1) From the A.A. line hit 'P'
2) From 0.1. enter: ' 2 P' for the character "C"
3) From 0.2. enter: '18 P' for the character "S"
4) From 0.3. enter: ' 8 P' for the character "I"
5) From 0.4. enter: '38 P' to end the message.
6) Turn off the power, and then back on, to return to operate
mode with the newly programmed CW ID message.
