
VoloAccess™ User Manual
Copyright © Vololink Pty Ltd 2006-2010 V1.43 July 2010 Page 11 of 78
Local Area Network (LAN)
Network cable is not connected
Network cable is connected to the VoloAccess and
a LAN is present
Network traffic is detected
Wide Area Network (WAN)
Network cable is not connected to the WAN port
Network cable is connected to the WAN port and a
WAN is present
WAN network traffic is detected
Phone 1 / Phone 2
Phone 1 / Phone 2 Indicators
Phone is On Hook and idle
ON – flashing at 1 second intervals
Phone is receiving a call or dialling out
ON – flashing at 1 second intervals
Power up sequence
During start up, the VoloAccess flashes the WiFi Protected Setup, Signal Strength and Mobile Network
indicators at 1 second intervals for about 10 seconds.