If the water pressure cannot be increased on site, this program function allows the

adjustment of the water intake monitor in line with the low water pressure.

2.3.18 Allergy

Note

Function data not available at this time.

When the program function allergy is activated, the technical process provides an

optimum adaptation to the needs of allergy sufferers:

– additional rinse cycles,

– higher water levels,

– additional spin for suds extraction,

– speed of spin for suds extraction,

– rinse to clear foam remnants from porthole.

2.3.19 Sensor controlled rinse cycle

During the rinse cycle, cold rinse water drenches the laundry and mixes with the

warm suds in the laundry, which increases the temperature of the rinse water.

The increase in temperature is monitored by the suds temperature sensor NTC

(R30).

The temperature increase provides an indication of the rinse effectiveness.

This program function activates/deactivates the sensor monitored rinse process.

2.3.20 Temperature

Set the temperature format in the display to Celsius (°C) or Fahrenheit (°F).

2.3.21 Current volume meter (VSZ)

Current volume meter (VSZ) = Flow meter (B3/4).

Technical adaptation and fault monitoring.

Optional, integrated into the water path control, refer to 040 2.6 Flow meter (B3/4).

2.3.22 Keypad tone

To activate the keypad tone acknowledgment.

2.3.23 Reset

All programming options are reset to delivery status.

Descriptive Technical Documentation

070-6 DTD no. 11-4800