2.3 Programming function (HY IV E)

2.3.1 Water Plus

Setting for Water Plus.

When Water Plus is selected, the water level is raised and/or an additional rinse

cycle is carried out.

2.3.2 Gentle cycle

Setting for gentle cycle.

Selecting the gentle cycle reduces the drum movement. Fabrics are washed

gently.

For lightly soiled laundry.

2.3.3 Suds cooling

At active suds cooling, in programs 167°F and higher, cold water is taken in at the

end of the main wash cycle to cool the suds down.

This reduces the danger of scalding by draining suds, and it protects drain pipes

that are not high temperature resistant.

2.3.4 Memory

At active memory function, the program settings made at the start of a program

and the special settings, such as temperature and spin speed, are saved. When

the same program is selected again, these special settings are automatically

activated.

2.3.5 Buzzer

Activate the buzzer to sound at program end and during rinse stop, and set the

buzzer tone.

Note

In case of a fault, the buzzer also sounds even if it has not been activated.

2.3.6 Language

The active language is used for the operating, programming and service modes.

2.3.7 Contrast

The contrast of the display can be adjusted to suit the existing lighting conditions.

Set display, refer to Display.

Descriptive Technical Documentation

070-4 DTD no. 11-4800