2 Function

2.1 Child safety sensor

If a living creature should be in the drum, the program sequence needs to be

interrupted and the door released electronically, so that in this emergency, it can

be pushed open from the inside.

Note

The door can only be pushed open from the inside, or pulled open from the

outside, as long as it is not electronically bolted.

After the program start, until the motor is activated, the control monitors the

movements of the drum via the RPM sensor (Tachogenerator).

If a living creature should be in the drum and it moves, this can be detected

through the movement sensor. The program is interrupted for 15 minutes. If

movement is sensed again, the program is stopped.

Note

During water intake, the tumbling laundry can cause drum movements. This can

activate the child safety sensor.

Press “Start” to continue the program.

2.2 Action after a power failure

The appliance automatically continues the program at the exact point where it

stopped when the power cut out.

Descriptive Technical Documentation

DTD no. 11-4800 070-3