60203_revB Page 13 of 35
7. Install and tighten the -4 oil line (with heat shielding) to the fitting as shown, leaving the other end
disconnected.
8. Replace the alternator and belt and reposition alternator cable to allow as much room as possible for
the exhaust system.
9. Attach heat wrap to all alternator wiring, spark plug wires, a/c line and power steering hose as shown.
Slit heat wrap as needed and secure with cable ties.
10. Secure the a/c line and battery cable as close to fender well as possible.
EXHAUST PIPE REMOVAL
1. Loosen the lower part of the rear valance panel (black panel beneath the rear bumper that the tail
pipes protrude through.
