SCION xA 2004 − SECURITY WITH RKE (V3)
Section III − Functional Verifications
Section III − Functional Verifications
Check: Look For:
Page 19 of 23 pages Supplier Ref #: DIO
Issue: A 06/09/03
Accessory Function Checks
Press and release the remote control s lock
button to start the system s arming process.
Wait 30 seconds.
Press and release the remote control s
unlock button to disarm the system.
Press and release the remote control s
unlock button again within 3 seconds of
disarming the system.
Open and close the driver s door.
Arm and disarm the system with the remote
again, then wait 30 seconds.
Press and release the remote control s
unlock button again to stop the arming
process.
Open the driver s door, then press and
release the remote control s lock button.
Close the driver s door.
1. The tail and marker lights flash once.
The buzzer chirps once.
All doors lock.
The Status Monitor s LED lights up.
2. After 30 seconds, the LED starts flashing;
the system is now armed.
3. The tail and marker lights flash twice.
The buzzer chirps twice.
The interior lights turn on for thirty seconds.
The driver s door unlocks.
The Status Monitor s LED stops flashing.
4. The tail and marker lights flash twice.
The buzzer chirps twice.
All remaining doors unlock.
5. The doors automatically relock.
The system automatically starts the arming
process.
6. Refer to step number 3.
7. The buzzer sounds continuously for 5
seconds.
8. The buzzer stops sounding.
