SCION xA 2004 − SECURITY WITH RKE (V3)
Section III − Functional Verifications
Section III − Functional Verifications
Check: Look For:
Page 22 of 23 pages Supplier Ref #: DIO
Issue: A 06/09/03
Press and release the remote control s
unlock button to stop the alarm.
Press and release the remote control s lock
button to start the system s arming process,
then wait 30 seconds until the system is
armed.
Unlock and open one of the rear passenger
doors to trigger an alarm.
Repeat the above steps with the other rear
passenger and back door (if equipped).
Roll up all windows, remove the key and
exit the vehicle.
Press and release the remote control s lock
button to start the system s arming process.
Wait 30 seconds.
Perform the following check in a
temperature−controlled environment
(50° − 90° F.)
With moderate force, tap the center of the
driver s door window with the tip of a key
to trigger the warn away alarm.
21. The horn stops sounding.
All the lights stop flashing and/ or turn off.
The Status Monitor s LED turns off.
22. Refer to step number 1 and number 2.
23. Refer to step number 9.
24. Refer to step number 22 and 23.
25. Refer to step number 1.
26. After 30 seconds, LED starts flashing; the
system is now armed.
27. The horn sounds repeatedly.
The headlights flash repeatedly.
The tail and marker lights flash repeatedly.
The LED lights up.
