SCION xA 2004 − SECURITY WITH RKE (V3)
Section II − Installation Procedure
Page 16 of 23 pages Supplier Ref #: DIO
Issue: A 06/09/03
3. Apply two large foam tapes to the V3 ECU as
shown. (Fig. F−3)
4. Locate and remove the bolt securing the air−
conditioner unit in the glove box area.
(Fig. F−4)
i. Do not discard the bolt.
5. Apply the butyl tape to the air−conditioner unit
as shown. (Fig. F−4)
6. Connect the V3 ECU connectors (8P, 12P,
22P) to the V3 ECU. (Fig. F−5)
i. Verify the connectors are plugged in
securely.
STOP
Fig. F−5
ECU Connectors
(8P,12P,22P)
V3 ECU
V3 Harness
Fig. F−3
Large Foam Tape
Large Foam
Tape
V3 ECU
Fig. F−4
10mm Socket
Vehicle’s Bolt
Air−Conditioner Unit
Butyl Tape
