SCION xA 2004 − SECURITY WITH RKE (V3)
Section III − Functional Verifications
Section III − Functional Verifications
Check: Look For:
Page 21 of 23 pages Supplier Ref #: DIO
Issue: A 06/09/03
Manually unlock the driver s door again and
hold it unlocked, open the door, then sit in
the driver s seat.
Insert the key into the ignition switch and
turn it to START to stop the alarm.
Turn the key back to LOCK , remove it,
and then exit the vehicle.
With the door open, press the lock switch on
the door to lock the doors, then close the
door to start the system s arming process.
Wait 30 seconds.
Reach inside and manually unlock the front
passenger s door to trigger an alarm.
16. The driver s door lock attempts to lock
repeatedly.
The horn continues to sound repeatedly.
The interior lights remain on.
The headlights, tail lights and marker lights
continue flashing.
The LED remains on.
17. The horn stops sounding.
All the lights stop flashing and/ or turn off.
The Status Monitor LED turns off.
The starter cranks and the engine starts.
18. All doors lock.
The Status Monitor s LED lights up.
19. After 30 seconds, the LED starts flashing;
the system is now armed.
20. The front passenger s door automatically
relocks.
The horn sounds repeatedly.
The interior lights turn on.
The headlights flash repeatedly.
The tail and marker lights flash repeatedly.
The LED lights up.
