Connect Systems Inc. - Model 9800 Page 37
OPERATION THROUGH REPEATERS OR TRUNKED SYSTEMS
(Only possible in the VOX mode)
Operating the 9800 through a repeater appears to the user as straight
simplex operation. It makes no difference if the repeater is DPL/CTCSS
or carrier activated, or if the repeater has hang time. Actually,
three or four seconds of hang time will improve operation because
there will be fewer noises to distract the conversation.
The optional .5 second, 9801 electronic voice delay board is highly
recommended when using the 9800 through repeaters to eliminate word
clipping or loss.
Note: See comments on setting the RX VOX control on page 8.
CALL PROGRESS TONE DETECTION
CALL PROGRESS TONE DETECTION: The 9800 incorporates very sophisticated
software algorithms that automatically sense the presence of dialtone
and/or busy signals. The method used will function with any tone
frequencies. There is nothing to adjust or maintain, it's completely
automatic!
Note: On lines 2.9. and 3.0. you can selectively enable or disable
busy signal disconnect and dialtone disconnect for special
applications.
******************** 9800-EXP ONLY ------------------->
Programming line 5.9. allows customizing call progress tone detection
to operate on most any telephone system.
<------------------- 9800-EXP ONLY ********************
