Connect Systems Inc. - Model 9800 Page 35
TELEPHONE REMOTE BASE: You can dispatch and have full use of your
system from any telephone by entering a 1 or 2 on (3.9.)...
Enter 0 if you are going to use mobile selective calling.
Enter 1 if you would like to access your radio system (Remote Base)
from any phone without the need to enter the system access code.
Enter 2 if you prefer that an access code is required to enter remote
base mode. Dial as described below after the beep:
From DTMF Telephones: Use Mobile Access Code programmed on 1.4.
From Dial Pulse Phones: Will only operate if mobile access code is *
(1.4. = 0) and DTMF signaling has been selected. Simply dial 0 from
the dial pulse phone.
When your remote base dispatch is finished, send the disconnect code
(1.6) before you hang-up. If you forget, built in safe-guards such as
call progress tone detection will automatically disconnect the 9800 on
most phone systems.
Note: A dial pulse phone can not turn off the 9800 when through. The
timeout or activity timer must perform the disconnect. (Or, the
mobile can disconnect by sending a #)
SELECTIVE CALLING: Any mobile or portable radio equipped with an
appropriate decoder can be selectively called from either a DTMF or
dial pulse telephone...
From DTMF Telephones: After the auto-answer beep, enter the desired
selective call sequence followed by *.
For Example:
DTMF : XXXXX* (x’s any length, any sequence)
CTCSS : XX* see table 2 (line 4.3. = 1)
Two Tone : XXX* see table 3 (line 4.3. = 2)
5/6 Tone : XXX* see table 4 (line 4.3. = 3)
The 9800 will hold the auto answered call for thirty seconds giving
the mobile time to respond. To answer a call and activate the two way
capability, the mobile must send the connect code (1.4.). When the
call is completed, the mobile should send the disconnect code (1.6.).
From Dial Pulse Phones: (Dial click detect or EXP option required).
After the auto-answer beep, dial 0 followed by the desired selective
call sequence.
For example:
DTMF : 0XXXXX* (X’s any length, any sequence)
CTCSS : 0XX* see table 2 (line 4.3. = 1)
Two Tone : 0XXX* see table 3 (line 4.3. = 2)
5/6 Tone : 0XXX* see table 4 (line 4.3. = 3)
