Connect Systems Inc. - Model 9800 Page 38
CTCSS SELECTION TABLE
FREQ CODE SELECT FREQ CODE SELECT FREQ CODE SELECT
67.0 XZ 10
71.9 XZ 11
74.4 WA 12
77.0 XB 13
79.7 SP 14
82.5 YZ 15
85.4 YA 16
88.5 YB 17
91.5 ZZ 18
94.8 ZA 19
97.4 ZB 20
100.0 1Z 21
103.5 1A 22
107.2 1B 23
110.9 2Z 24
114.8 2A 25
118.8 2B 26
123.0 3Z 27
127.3 3A 28
131.8 3B 29
136.5 4Z 30
141.3 4A 31
146.2 4B 32
151.4 5Z 33
156.7 5A 34
162.2 5B 35
167.9 6Z 36
173.8 6A 37
179.9 6B 38
186.2 7Z 39
192.8 7Z 40
203.5 M1 41
210.7 42
218.1 43
225.7 44
233.6 45
241.8 46
250.3 47
TABLE 2
The CTCSS selective call code digits (10-47) define all 38 EIA
standard CTCSS tones. To find the call code for a specific CTCSS
frequency, locate the frequency in Table 2. The two digit call code is
found adjacent in the select column.
NOTES: 1. CTCSS is an option and will not function unless factory
installed.
2. The length of CTCSS alerting can be varied by the quantity
of beeps selected in (4.4.)
3. See 'Incoming Calls' in the Operation section to determine
the proper use of the selective call codes determined from
this table.
Example: The selective call code required to signal 131.8 Hz.
is: 29
