4.6 Service Mode Overview
W 4800
Initial requirements
A Install and connect the appliance correctly.
A End the current program as well as the demo mode.
A Open the door.
Accessing
x
Note
Access has to be completed within 10 seconds.
A Press Start and hold.
A Close the door.
A As soon as the Start LED flashes, release Start.
A Press Start 3 times and at the 3rd time, hold until the Start LED flashes
slowly (1 Hz).
Acknowledgement indicator
Start LED flashes slowly (1 Hz).
If access is not successful, the control reverts automatically to the normal
programming mode.
Options
A To select a service function: Press the Buzzer pad.
A To start a service function: Press Start.
A Actual: after access the buzzer LED flashes 2x. Possible to exit ser vice mode
af ter pressing Start.
A Actual: Press buzzer, flashing rhythm remains at 2x, now fault code is issued.
A Actual: Buzzer LED flashes 3x: Component test. However, 9=buzzer on, 10=
LED test.
x
Note
The component test switches off automatically 30 minutes after the last
component is activated.
Descriptive Technical Documentation
070-46 DTD no. 11-4800
This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am
