Produkty značky Leica-biosystems

Leica IP S

4. Instrument Setup

4.6 Automated unload station (optional)

Optionally available for the printer is an auto-

mated multi-level cassette unload station, where

the imprinted specimen slides are collected on

individually removable and stackable trays (40)

in the order in which they were printed.

The multi-cassette unload station comes com-

plete with 10 trays, all of which can be inserted

simultaneously. Each tray holds up to 11 slides.

Installing the multi-cassette unload station:

• Unpacktheunloadstationandplaceitona

stable laboratory bench at the installation site.

Fig. 14

• Placetheinstrumentontotheunloadstation.

2 persons are required to do this!

• Holdtheprinteronbothsides(rightandleft)

and first insert the two rear bolts (35, Fig. 14)

of the unload station into the openings in the

base plate of the printer.

Then carefully lower the front part of the

printer unto the third bolt (36) so that the plug

connection (37) locks into place in the printer

base plate and the printer remains securely

fastened on the unload station.

• Placethestackoftrays(39) onto the lifting table

(38) of the automated unload station. See chap-

ter 5.2 for details on the lifting table controls.

Important!

Prior to installation, the printer must

be switched off and unplugged from

power supply.

The manual unload station (chapter 4.5)

The collar screws (30, Fig. 13) must also

be removed prior to placing the printer

onto the automated unload station.