60203_revB Page 9 of 35
7. Remove 6 bolts securing the metal bumper (3 each side).
8. Remove 6 plastic clips and ambient air temp sensor from air guides and remove air guides.
9. Remove 4 bolts holding headlights. Unplug and remove headlights.
ENGINE COMPARTMENT PREPARATION
1. Remove the plastic engine cover and the air filter top cover and set aside for later use.
2. Remove the remaining air filter housing and all ducting up to the throttle body. Set aside the two nuts
for later use.
3. Remove the windshield washer reservoir from the vehicle. Set aside the w/w pump for later use.
4. Remove the coolant reservoir and upper and lower radiator hoses.
5. Remove the cover and the power cable from the fuse box on the passenger side.
6. Release the four clips and lift the fuse panel out of the way.
7. Remove the bolt holding the fuse box lower.
8. Slide the fuse box towards the rear of the vehicle approximately 2” to align with the hole in the tray.
9. Use factory bolt with the supplied flat washer and ny-lock nut to hold box in new location.
10. Replace the fuse panel and cover.
