GRAB HANDLES
Additional molded grab handles shall be installed inside the cab. The handle shall be located on
the officer's side on the A post and one each side on the B Posts side of the crew area doors.
RADIO COMPARTMENT WITH DOOR
Beneath the officer's seat there shall be a radio compartment with interior dimensions of 19-1/2"
wide x 17" long x 7" high. This compartment shall have a side mounted diamond plate door
mounted on a piano hinge.
CAB STEP DIMENSIONS
The front cab steps shall have the following overall dimensional requirements:
Driver's lower step size 10-1/4 inches deep minimum
Driver's lower step size 29-1/2 inches front to back
Officer's lower step size 10-1/4 inches deep minimum
Officer's lower step size 29-1/2 inches front to back
INTERMEDIATE CAB STEP
The cab shall intermediate inside corner step. The intermediate step shall be approximately 9
inches from the top of the lower step to the top of the intermediate step.
INTERIOR CAB STEP TRIM
The cab steps shall be completely enclosed behind each door. No portion of the cab entrance step
shall be exposed when the door is in the closed position. The lower step shall be sealed from the
underside of the cab to eliminate road splash from entering the step area while the vehicle is
driving. The horizontal step surfaces shall be covered with bright aluminum tread plate meeting the
requirements of NFPA-1901. The vertical toe kick surface area of the cab step wells shall be
covered with aluminum tread plate.
COMPARTMENT OPEN LIGHT
A Red Open Compartment Flashing Light, Whelen OS Series LED shall be mounted on the driver's
side face of the overhead panel. A chrome flange is to be supplied with the light.
The light circuit shall be wired so that the light circuit is deactivated when the parking brakes of the
apparatus are applied. A label shall be applied adjacent to the light 'DOOR OPEN'.
DOME LIGHTS
Three (3) seven inch diameter clear dome lights shall be supplied. These lights shall be operated
by opening any door, as well as, by individual switches mounted on the individual clear lens light.
One light shall be installed in the front of the cab centered over the engine doghouse. Two lights
shall be installed in the rear crew area of the cab.
ADDITIONAL LED WHITE/RED DOME LIGHTS
Four 6” diameter combo color LED interior dome lights shall be provided. The Lights shall have
high output white LED's with a light output of 450 lumens ea. The light shall be rated for 50,000
hours and have a 10 year warranty from the manufacturer. Two lights shall be installed in the front
of the cab, one each adjacent to the driver and officer. Two lights shall be installed in the rear crew
