DRIVER INSTRUMENTATION AND CONTROLS
The cab dash panel shall have black textured anti-glare surface. The gauges shall have red LED
back lighting for enhanced visibility. The instrument panel shall include the following gauges and
indicators.
Electronic speedometer with LCD odometer
Tri cluster gauge that includes:
Electronic tachometer
Engine coolant temperature gauge, with warning light and buzzer
Engine oil pressure gauge, with warning light and buzzer
Transmission fluid temperature gauge, with warning light and buzzer
Two air pressure gauges, with warning light and buzzer
Voltmeter, with low voltage warning light and buzzer
Fuel level gauge
High beam indicator light
Parking brake set light
Turn signal indicator lights
The lighting control panel is to be located to the left side of the instrument panel. This panel shall
have a black textured anti-glare surface. The lighting control panel shall include the following:
Headlight control switch
Dash rheostat for instrumentation lighting control
Wiper and washer control switches
The engine control panel is to be located beneath the instrument panel on the driver's right hand
side. The panel shall have a black textured anti-glare surface. The engine control panel shall
include the following:
Keyless ignition switch with a green pilot light
AUDIBLE TURN SIGNAL REMINDER
There shall be an audible alarm that shall sound when the turn signal remains flashing for a
distance greater than one mile. The reminder shall not sound when the hazard lights are operating.
AUDIBLE LIGHTS ON REMINDER
There shall be an audible alarm that shall sound when the headlight switch is left in the on position
and the ignition is off. The alarm shall self cancel after 2 minutes of operation.
AUDIBLE PARKING BRAKE REMINDER
There shall be an audible alarm that shall sound when the parking brakes are NOT set and the
ignition is turned off. This alarm shall self cancel after 2 minutes.
The Parking Brake reminder shall sound an audible alarm when the parking brakes are set and an
indicated speed of over two miles per hour occurs.
DUAL TRIP ODMETERS
There shall be two (2) trip odometers in the driver's information center. Each shall be capable of
independent operation and reset. They shall be labeled Trip1 and Trip2 when the trip mileage is
