SCION xA 2004 − SECURITY WITH RKE (V3)
Section II − Installation Procedure
Page 15 of 23 pages Supplier Ref #: DIO
Issue: A 06/09/03
13. Plug in the V3 harness’ white 12P connectors
between the vehicle harness white 12P
connector and the passenger side cowl area.
(Fig. E−10)
i. Verify the connectors are plugged in
securely.
14. Secure the 12P connectors to the vehicle
harness with one medium wire tie. (Fig. E−10)
F. V3 ECU Preparation and Installation
1. Turn the adjustment screw on the V3 ECU to
the 6 position. (Fig. F−1)
2. Insert the ECU mounting bracket into the
indicated bracket slot on the V3 ECU.
(Fig. F−2)
i. Insert the mounting bracket into the correct
slot; you have only one chance to install it
properly.
STOP
Fig. E−10
Side Cutter
14P (White)
V3 Harness
Medium Wire Tie
Fig. F−2
V3 ECU
ECU Mounting
Bracket
STOP
Fig. F−1
Small Flat Blade Screwdriver
V3 ECU
GBS Settin
