N C
M Y
INSTALLATION INSTRUCTIONS
LEVELLING
x Install the appliance on a solid and level floor
surface, preferably in a corner of the room.
x Make sure that all four feet are stable and
resting on the floor and then check that the
appliance is perfectly level (use a spirit level).
x If the floor is uneven, adjust the levelling feet
as required (do not insert pieces of wood
etc. under the feet).
q
. Slacken the locknut using the wrench
supplied
w
. Adjust the height of the foot, turning it by
hand.
e
. Tighten the locknut anti-clockwise.
x Iftheapplianceistobeinstalledona
wooden floor, distribute the weight by
placing it on a 60 x 60 cm sheet of plywood
at least 3 cm in thickness. Secure the
plywood sheet to the floor.
COVER PANEL / WORKTOP
The appliance can be installed under a fitted
kitchen worktop.
x Unplug the appliance from the mains.
q
. Unscrew the two worktop fixing screws from
therearoftheappliance.
w
. Slide the worktop fully backward and lift it
upwards to remove.
Install the cover panel following the relative
instructions.
e
. Refit the fixing screws and tighten them.
BUILD-UNDER OPENING
DIMENSIONS
Width 600 mm
Height 825 mm
Depth 600 mm
WARNING
Only plug the machine into the mains power
socket after you have fitted the cover panel or
the machine worktop.
q
e
w
14
