N C
M Y
INSTALLATION INSTRUCTIONS
TRANSIT BOLTS
Your machine has been assembled with
special transit bolts to prevent possible
transit damages.
Before using the machine you must
remove the transit bolts (Fig. 1).
Depending on the model, there are three
(Fig. 2) or four transit bolts (Fig. 3).
1. Slacken the bolts with the wrench supplied.
2. Unscrew the bolts fully by hand.
3. Hold each bolt head and pull the bolts
through the wide part of the holes.
4. Close the holes with the covers supplied;
insert the covers in the wide part of the hole
and slide them toward the narrowest part
until they click into place (Fig. 4).
5. Keep the transit bolts for future use.
Fig. 2
Fig. 4
Fig. 1
Fig. 3
Important
Whenever the appliance is transported, the
transit bolts must be refitted.
Pry up the plastic covers with a screwdriver,
slide in the opposite direction to the arrow and
remove. Insert and tighten the transit bolts,
performing the steps for removal in reverse
order.
13
