
Issue Date: 2010-03-02 Page 12 of 23 Report Reference # E336418-A29-UL
2010-10-22
IEC 60950-1
Clause Requirement + Test Result - Remark Verdict
3
WIRING, CONNECTIONS AND SUPPLY
Pass
3.1 General Pass
3.1.1 Current rating and overcurrent protection All internal wires and
INTERCONNECTING
CABLES possess adequate
cross-sectional areas for their
intended application and all
internal wirings are adequately
insulated.
Pass
3.1.2 Protection against mechanical damage The wires are routed away
from sharp edges and parts
which could damage
insulation.
Pass
3.1.3 Securing of internal wiring Internal wiring routed,
supported, clamped or secured
in a manner that excessive
strain on wire and on terminal
connections, loosening of
terminal connections and
damage of conductor
insulation are unlikely.
Pass
3.1.4 Insulation of conductors The insulation of the individual
conductors is suitable for the
application and the working
voltage.
Pass
3.1.5 Beads and ceramic insulators N/A
3.1.6 Screws for electrical contact pressure N/A
3.1.7 Insulating materials in electrical connections N/A
3.1.8 Self-tapping and spaced thread screws N/A
3.1.9 Termination of conductors Pass
10 N pull test Pass
3.1.10 Sleeving on wiring The sleeving used as
supplementary insulation on
internal wiring is retained by
positive means.
Pass
3.2 Connection to an a.c. mains supply or a d.c. mains supply Pass
3.2.1 Means of connection The unit is provided with an
appliance inlet.
Pass
3.2.1.1 Connection to an a.c. mains supply Pass
3.2.1.2 Connection to a d.c. mains supply N/A
3.2.2 Multiple supply connections N/A