Issue Date: 2010-03-02 Page 13 of 23 Report Reference # E336418-A29-UL
2010-10-22
IEC 60950-1
Clause Requirement + Test Result - Remark Verdict
3.2.3
Permanently connected equipment N/A
Number of conductors, diameter (mm) of cable and
conduits ................................................................. :
-
3.2.4 Appliance inlets The appliance inlet complies
with IEC 60320.
Appliance inlet can be inserted
without difficulty and so placed
that, after insertion of the
connector, the equipment is
not supported by the connector
for any position of normal use
on a flat surface.
Pass
3.2.5 Power supply cords Power supply cord suitable for
application and subject to
country's national code and
regulations to be provided by
the manufacturer.
(Optional provided).
Pass
3.2.5.1 AC power supply cords (Optional provided). Pass
Type....................................................................... : (See appended table 1.5.1) -
Rated current (A), cross-sectional area (mm²),
AWG ...................................................................... :
(See appended table 1.5.1) -
3.2.5.2 DC power supply cords N/A
3.2.6 Cord anchorages and strain relief Strain Relief provided for
output cord.
Pass
Mass of equipment (kg), pull (N) ........................... : Equipment 0.49 kg maximum.
30 N pulling force was applied.
-
Longitudinal displacement (mm) ........................... : 0.6 mm maximum. -
3.2.7 Protection against mechanical damage Cord not exposed to sharp
points or edges.
Pass
3.2.8 Cord guards N/A
D (mm); test mass (g)............................................ : -
Radius of curvature of cord (mm).......................... : -
3.2.9 Supply wiring space N/A
3.3 Wiring terminals for connection of external conductors N/A
3.3.1 Wiring terminals The equipment is not
permanently connected or
provided with a non-
detachable power supply cord.
N/A
3.3.2 Connection of non-detachable power supply cords N/A
3.3.3 Screw terminals N/A
