Issue Date: 2010-03-02 Page 8 of 23 Report Reference # E336418-A29-UL
2010-10-22
IEC 60950-1
Clause Requirement + Test Result - Remark Verdict
Rated current (A), cross-sectional area (mm2),
AWG ...................................................................... :
(See appended table 1.5.1)
-
2.6.3.3 Size of protective bonding conductors Only functional Earthing
provided.
N/A
Rated current (A), cross-sectional area (mm2),
AWG ...................................................................... :
-
2.6.3.4 Resistance (Ohm) of earthing conductors and their
terminations, test current (A) ................................. :
N/A
2.6.3.5 Colour of insulation................................................ : N/A
2.6.4 Terminals N/A
2.6.4.1 General N/A
2.6.4.2 Protective earthing and bonding terminals N/A
Rated current (A), type and nominal thread
diameter (mm) ....................................................... :
-
2.6.4.3 Separation of the protective earthing conductor
from protective bonding conductors
N/A
2.6.5 Integrity of protective earthing N/A
2.6.5.1 Interconnection of equipment N/A
2.6.5.2 Components in protective earthing conductors and
protective bonding conductors
N/A
2.6.5.3 Disconnection of protective earth N/A
2.6.5.4 Parts that can be removed by an operator N/A
2.6.5.5 Parts removed during servicing N/A
2.6.5.6 Corrosion resistance N/A
2.6.5.7 Screws for protective bonding N/A
2.6.5.8 Reliance on telecommunication network or cable
distribution system
N/A
2.7 Overcurrent and earth fault protection in primary circuits Pass
2.7.1 Basic requirements Protection provided as part of
the building installation.
Pass
Instructions when protection relies on building
installation
Pluggable Type A. Pass
2.7.2 Faults not covered in 5.3 Protection from faults not
covered in 5.3 are provided by
installation.
Pass
2.7.3 Short-circuit backup protection The building installation is
considered as providing short-
circuit backup protection for
PLUGGABLE EQUIPMENT
Pass
