SAMSUNG CLP-510 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 8
USA Sales: T 800.221.3516 F 888.791.9188
International Sales: T +1 631.590.1040 F +1 631.218.3285
www.summitechnologies.com
13) Remove the large developer roller gear See Fig. 27
14) Remove the feed roller drive gear, flat washer and
bushing from the cartridge. See Figures 28 & 29
15) On the small
gear side, remove
the E-ring from the
developer roller
shaft, and pry off
the metal bushing. See Figures 30 & 31
16) Remove the developer roller.
The metal bushing on the opposite side is locked in
place by a metal contact plate. See Figures 32 & 33
17) Clean the doctor blade and feed roller. Do not use
any chemicals on the DB as they will damage the feed
roller, and may react with the replacement toner. If there
is a build up on the DB, carefully take the wood side of a
cotton swan and rub it along the edge of the blade. Be
very careful not to damage or bend the blade. See
Figure 34
18) Wipe the developer roller down with a clean lint free
cloth. It is also not advisable to use any chemicals here
either. The residue from the chemicals may react with
Figure 28
Figure 27
Figure 30
Figure 31
Figure 32
Figure 33
Figure 29
