SAMSUNG CLP-510 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 5
USA Sales: T 800.221.3516 F 888.791.9188
International Sales: T +1 631.590.1040 F +1 631.218.3285
www.summitechnologies.com
The waste tank has one section that brakes a sensor
signal to show it is installed, and also has a section that
when it fills up, blocks a sensor and triggers a waste
toner full message. See Figures 8, 9 & 10.
Required Tools
Toner approved vacuum or toner approved dust
collector system
A small screw driver (Common Style)
Phillips head screwdriver
Needle Nose Pliers
Jewelers screwdriver set
Samsung reset box, and appropriate cable
Supplies Required
CLP-510 Dedicated Color Toner
Samsung reset box, or new replacement chips
Lint free Cloths
Conductive grease
1) Remove the three screws from the top cover. See
Figure 11
2) With the handle facing you, remove the screw from
the left side. See Figure 12
3) Pry the cover away from the 2 tabs on the left side
and lift the left side up slightly. See Figure 13
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
