SAMSUNG CLP-510 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 10
USA Sales: T 800.221.3516 F 888.791.9188
International Sales: T +1 631.590.1040 F +1 631.218.3285
www.summitechnologies.com
24) Install the feed roller drive gear, spacer side towards
the cartridge. See Figure 42
25) Install the gear train cover and two
screws. See Figure 43
26) Install the large drive gear, flat washer, and black
end cap. See Figure 44
27) Install the PCB three screws and contact. See
Figure 45
28) Fill with the appropriate toner,
and replace the fill cap. Remember, it is not a good idea
to change the color of a cartridge. See Figure 46
29) Reset or replace the chip. Reset boxes are available
that can reset the OEM, Convert LY to HY, and also
convert Samsung to Xerox or visa versa. See Figure 47
30) Snap the top cover in place make sure the four tabs
are locked in. See Figure 48
Figure 42
Figure 43
Figure 44
Figure 45
Figure 46
Figure 47
