SAMSUNG CLP-510 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 6
USA Sales: T 800.221.3516 F 888.791.9188
International Sales: T +1 631.590.1040 F +1 631.218.3285
www.summitechnologies.com
4) Pry the cover away from the two tabs on the right
side. Lift the cover up and away from the cartridge. See
Figures 14 & 15
5) Carefully remove the fill plug. Do not insert a small
screwdriver down the side of the fill plug as the fill plug
wall if very easily damaged. Instead, insert a flat head
screwdriver under the lip of the plug, and work the plug
out. See Figures 16 & 17
6) Remove the fill plug, and dump
out any remaining toner. Vacuum/blow out any
remaining toner from the cartridge.
7) Remove the two screws from the top cover over the
developer roller. See Figure 18
8) With the flat head screw driver, pry off the black end
cap off the developer roller shaft on the small gear side
of the cartridge. Remove the black washer, developer
roller drive gear, and the two small gears next to it.
Remove the white plastic bushing. See Figures 19, 20,
& 21
Figure 14
Figure 15
Figure 16
Figure 17
Figure 18
Figure 19
