SAMSUNG CLP-510 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 9
USA Sales: T 800.221.3516 F 888.791.9188
International Sales: T +1 631.590.1040 F +1 631.218.3285
www.summitechnologies.com
the replacement toner. Check with your vendor before
using anything other than a clean cloth to clean these
parts.
19) Install the developer roller, long shaft side to the
large gear or PCB side. See Figure 35
20) On the small gear side, install the
metal bushing and E-ring. You may have to tap the
bushing in place to get access to the E-ring slot. See
Figures 36 & 37
21) Install the plastic bushing, three gears, black
washer, and black end cap. See Figure 38
22) Install the two screws on the metal developer roller
cover. See Figure 39
23) On the large gear side, make
sure the metal bushing is still in place. If not press it
back in. Install the plastic bushing. See Figures 40 & 41
Figure 34
Figure 35
Figure 36
Figure 37
Figure 38
Figure 39
Figure 40
Figure 41
