V0.1
Page 7
Primary Access Point Setup
In this section we will cover the fields that need to be edited in order to setup the Primary
Access Point. The primary Access Point is responsible for broadcasting the internet connection.
Standard devices for this purpose are the NanoStation and Rocket.
1. Logon to your chosen primary access point device. The IP address to type into your
browser is written on the device’s box. Usually 192.168.1.20.
a. Username: ubnt
b. Password: ubnt
2. Click Wireless tab.
3. Edit the following fields
a. Basic Wireless Settings - section
i.Wireless Mode - Access Point
ii.SSID - Maximus Outdoor
iii.Country Code - Canada
iv.Channel Width - 20 MHz
4. Click “Change”
5. Click “Network” tab
6. Edit the following fields
a. Network Role - Section
i.Network Role - Bridge
b. Network Settings - Section
i.Bridge IP Address - static
ii.IP Address - Recommended IP “192.168.5.2”
iii.Gateway IP - 192.168.5.1
iv.Primary DNS IP - 192.168.5.1
7. Click “Change”
8. Click “Advanced” tab
9. Edit the following fields
a. Advanced Wireless Settings - Section
i.Distance - Set the slider to the distance of the furthest station.
10. Click “Change”
11. Click “System” tab
12. Edit the following fields
a. Device - Section
i.Device Name - MaximusPAP
b. Date Settings - Section
i.Timezone - Set to local timezone
13. Click “Change”
14. Click “Apply”
