V0.1
Page 4
2. Find devices DHCP server setting and keep note of them. Standard DHCP settings are
as follows:
a. Gateway IP: 192.168.1.1
b. DNS Server: 192.168.1.1
c. IP Range: 192.168.1.100 to 192.168.1.199
d. Subnet Mask or Netmask: 255.255.255.0
3. Log on to the Ubiquiti AirRouter by typing 192.168.1.1
4. Enter standard username and password and click login
a. Username: ubnt
b. Password: ubnt
5. Click on the “NETWORK” tab
6. Edit the following fields
a. WAN Network Settings - Section
i.WAN IP Address - Static
ii.IP Address - Set to same network as client’s device but outside client’s
device’s DHCP range. For example, if client device IP is 192.168.1.1 and
DHCP range is 192.168.1.100-199 set this to “192.168.1.10”.
iii.Netmask - Same as client device’s. Usually “255.255.255.0”.
iv.Gateway IP - Client device’s IP adress. If client device IP is 192.168.1.1 set
this to “192.168.1.1”.
v.Primary DNS IP - Same as client device’s. If client device DNS is 192.168.1.1
set this to “192.168.1.1”.
b. LAN Network Settings
i.IP Address - 192.168.5.1
ii.Range Start - 192.168.5.100
iii.Range End - 192.168.5.199
iv.Port Forwarding - Checked
v.Click Configure button next to port forwarding, a new window will open. Setup
as illustrated below:
