V0.1
Page 6
● If cable or cellular modem set to DHCP. (Videotron) Note: Skip to
section d.
● If DSL set to PPPoE. (Bell)
iii.PPPoE Username - Enter PPPoE username provided by client.
iv.PPPoE Password - Enter PPPoE Password provided by client.
d. LAN Network Settings
i.IP Address - 192.168.5.1
ii.Range Start - 192.168.5.100
iii.Range End - 192.168.5.199
iv.Port Forwarding - Checked
v.Click Configure button next to port forwarding, a new window will open, and
setup as illustrated bellow:
Note: You may continue past 192.168.5.52 if more than 3 Maximus control systems are
installed.
5. Click Save. The window will close.
6. Scroll down to the bottom and click change.
7. Click Apply
