V0.1
Page 5
Note: You may continue past 192.168.5.52 if more than 3 Maximus control systems are
installed.
7. Click Save. The window will close.
8. Scroll down to the bottom and click change.
9. Click Apply
10. Log back on to the client’s device.
11. Find DMZ settings.
12. Set DMZ host or IP to AirRouter’s IP set in step 6 stage ii. Insure that DMZ settings are
permanent and applied.
Standard Modem
1. Log on to the Ubiquiti AirRouter by typing 192.168.1.1
2. Enter standard username and password and click login
a. Username: ubnt
b. Password: ubnt
3. Click on the “NETWORK” tab
4. Edit the following fields
c. WAN Network Settings - Section
i.Network Mode - SOHO Router
ii.WAN IP Address
