To replace the frame assembly:
1.
Position the metal frame assembly on the plastic
housing. Line up the screw holes, and be sure the
paper release button is inserted in the back of the
plastic housing. Replace the two screws (Figure 4,
#1).
2.
Position the paper guide (Figure 4, #5) and snap it
into position.
3.
Plug in the connector (Figure 4, #4).
4.
Replace the lever lock and attach the armed end to
the spring (Figure 4, #3).
5.
Replace the grounding strap and screw (Figure 4,
#2).
6. Reconnect the housing assembly and paper tray
assembly.
ImageWriter II rev. Aug 87 SheetFeeder / 6. 9
