13
905077 REV B 7/23/14, 1970-78 CAMARO WITH A/C EVAP KIT PG 13 OF 28
Kick Panel
Fresh Air
Cap
(2) #14 X 3/4”
Sheet Metal
Screws
1/4-20 X 1” Bolt
w/ Washer
Evaporator Installation
1. Lift evaporator unit up under the dashboard (See Figure 15, below). Secure loosely to the firewall from the
engine compartment side using a 1/4-20 x 1” bolt and washer (See Figure 15, below).
2. Using (2) #14 x 3/4” sheet metal screws, secure the front evaporator mounting bracket to the inner cowl (See
Figure 15, below).
3. Verify that evaporator unit is level and square to the dash, and then tighten all mounting bolts. NOTE: Tighten
the bolt on the firewall first, and then tighten the front mounting bracket screws.
#10 A/C
Hose
#6 A/C
Hose
Press
Tape
Heater
Hose
Hose
Clamps
Figure 15a
Figure 15
