14
905077 REV B 7/23/14, 1970-78 CAMARO WITH A/C EVAP KIT PG 14 OF 28
OEM
Center Louver
Assembly
65118-VUP
Cut Foam Strip
Approximately 7”
Center Louver Installation
Mounting
Holes
62618-VCE
Center Louver
Hose
Adapter
(2) #8 X 1/2”
Pan Head
Screws
Center Louver
Duct Hoses
OEM Screws
1. Install foam strip onto center louver assembly as shown in Figure 16, below.
2. Install center louver duct hose adapter onto center louver assembly (See Figure 16, below).
3. Using the (2) mounting holes on the bottom side of the duct hose adapter as a guide, drill (2) 1/8” holes
in the louver assembly. Secure duct hose adapter to louver assembly using (2) #8 x 1/2” pan head screws
(See Figure 16a, below).
4. Reinstall dash.
5. Pull center louver duct hoses through dash and attach to center louver duct hose adapter as shown in
Figure 16, below.
6. Install center louver assembly into dash, using OEM mounting screws to secure louver assembly to dash
(See Figure 16, below).
Figure 16
Figure 16a
Figure 16b
