76-110-0887/0, Issue 1
19-8
unit
e
system:
Press the [DN List] icon.
The DN LIST Screen appears. Remember that the screen is for
viewing only; you cannot add any information.
4. Select any available legal extension.
5. Enter the necessary parameters for the hunt group dedicated to
e
maGEN
.
These parameters are:
• DN of the
e
maGEN
hunt group;
• The name of the
e
maGEN
hunt group, consisting of up to five
alphanumeric characters, such as, IVMHN, for example;
• Hunt type, the type of search the
e
maGEN
hunt group will make
to identify the next extension to ring;
• Busy forward extension, to which calls will be forwarded in the
event the
e
maGEN
hunt group is busy;
Although you can designate an attendant position, ICI queue,
hunt group, announcer DN or a recorded announcement as the
busy forward extension for the hunt group, for
e
maGEN
pur-
poses you assign a recorded announcement, RAN1 in the exam-
ple.
• Announce rate. You are able to enter data into the Announce rate
field, which defines the time between announcements, only if you
have entered a Recorded Announcement Number (RAN) in the
Busy Forward field.
• ICM Group and ICM Class. See Section 19.7.
6. Press the [Save] icon to save your data entry.
Step 2
1. Press the [Edit Units] icon.
The program displays the Allocate To Hunt Groups Screen, with
the group DN and hunt number of the
e
maGEN
hunt group at
top center of the screen;
The screen also displays the number of remaining possible sta-
tion entries in the upper right corner of the screen. There is a sys-
tem maximum of:
• 256 entries in a
unit
e
128 system
• 512 entries in a
unit
e
400 system
