Section 19: eManager PROGRAMMING FOR emaGEN IN unite SYSTEMS
19-5
provides blank fields for entering voice channel and DN numbers
for each
e
maGEN
voice mail port
To complete the screen:
1. Move the cursor to the first position in the Voice channel column,
opposite
e
maGEN
Card #1, Port number 1.
2. Type in the number of the first of the assigned voice channels
viewed and noted in step 3 of Section 19.2.1 above.
You cannot enter a voice channel number unless you have defined
the MIM in the section above. If the voice channel is assigned to
another use or undefined, the program displays an error message to
that effect.
After defining the voice channel:
3. Move the cursor to the DN field and assign the desired DN for the
e
maGEN
.
If you attempt to assign a DN without assigning a voice channel first,
the program displays an error message to that effect.
In selecting the DN for each
e
maGEN
-PC port/voice channel, you
can use any legal extension DN, including up to four digits from 0 to
9.
NOTE
The # and
*
characters should not be used
as digits in a DN.
To view all DN numbers already defined, and thus unavailable for
use in your
unit
e
system:
4. Press the [DN List] icon.
The program displays the DN LIST Screen.
Note that the screen displays the voice mail related DNs that are
described below.
• View on this screen the details of all DNs already assigned.
5. Mentally select a block of unassigned DN numbers that satisfy
the following requirements:
• a consecutive group of DNs to be assigned to
e
maGEN
-PC
port/voice channels;
• a single DN, to be assigned to the
e
maGEN
hunt group. See
Section 19.4, below.
6. Press the [Prev] icon to return to the IVM Definitions Screen.
