8825/8830 Controller Setup Manual for Firmware 6.0 128

Configuring the System Administration Parameters

(continued)

Setting The Menu Lockouts

Purpose

To prevent unauthorized changing of printer operating parameters, the

“Utilities,” “Setup I/O Ports,” “Setup Printer,” and “Processing Defaults”

menus of the Printer Control Panel can all be independently locked. This

setting of the menu lockouts is accomplished through use of the password

protected System Administration main menu as described below:

PATH TO SETTING THE MENU LOCKOUTS

At the Printer Control Panel when the display shows <IDLE>, press [ON-

LINE]. When the display shows <PAUSED>, press [ENTER]. When the

display shows <UTILITIES>, press [NEXT] until <SYSTEM

ADMINISTRATION> is displayed. Press [ENTER] and, using the numeric

keypad, input the required “password,” then press [ENTER] again. If <MENU

LOCKOUT> is not displayed, press [NEXT] until it is and press [ENTER].

Use the [NEXT] and [PREVIOUS] keys to scroll through the list of main menu

names. Press [ENTER], followed by pressing [NEXT] to change the locking

condition of the displayed item. Press [ENTER] to confirm or [EXIT] to

escape. Press [EXIT] to escape the current menu. Press [ON-LINE] to put

the printer back on line.