3 Fault Repair
3.1 All LEDs flash
Symptom
It's not possible to start a program, it's not possible to access the programming or
service mode.
Cause
The appliance is in demo mode.
Remedy
A Deactivate the demo mode, refer to Demo mode – activate / deactivate, 070
4.3, Demo mode – activate / deactivate, 070 4.4.
3.2 LED Start flashes rapidly
Symptom
The drain pump (M8) is switched on for up to one hour, depending on level.
The buzzer sounds, independent of setting, intermittently for two minutes.
Sevensegment display “- - -”.
Cause
Technical fault
Remedy
A In service mode, read the fault code, refer to Service mode – Overview, 070
4.5, Service Mode Overview, 070 4.6.
Descriptive Technical Documentation
DTD no. 11-4800 070-11
22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
