3.6 Display indicates: Locked, enter code
Symptom
It's not possible to select a program.
Cause
The electronic lock function is activated.
Remedy
x
Note
Electronic lock function – refer to the operating instructions.
A Release the lock to select a program cycle: Enter code 125.
A Deactivate the lock: Select program function “lock” and enter code 125, refer
to Programming Overview, 070 4.1, Programming Overview, 070 4.2.
x
Note
Enter the number and confirm: Select the digits by pressing the pad + / - , and
confirm with the OK pad.
3.7 Display indicates: No start. Demo mode activated
Symptom
It's not possible to start a program.
Cause
Demo mode is activated.
Remedy
A To deactivate the demo mode, refer to Demo mode – activate / deactivate,
070 4.3, Demo mode – activate / deactivate, 070 4.4.
Descriptive Technical Documentation
070-14 DTD no. 11-4800
This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am
