Daewoo Markası'nın Ürünleri

4-2. Spin discharge test mode

1) How to enter

 -Intheinitialcondition,presstherinsingbuttonthreetimeswhileholdingdownthewaterlevelbutton.

2) Control procedures

 -UsingthespindrybuttonselectthetargetRPM.(300~800RPM:stepsof20RPM)

- Press the start/pause button to start spin drying.

3) The current RPM is displayed during operation.

When it stops the target RPM is displayed.

4-3. EEPROM reset mode

1) Procedure to enter this mode

- Press the Spin speed button three times while pressing the Water level button in the initial state.

2) Press the Start/Pause button to reset the changed EEPROM values and to restore the values with the

factory default settings.

3) Quite often the EEPROM values need to be changed during the experiment and development process

and the modified program is usually downloaded with flash ROM writer. However, the values stored in

EEPROM are not erased in this case, and they can be restored easily using this mode.

4) Display contents

- “EEP

➔

ALL

➔

CLr” are displayed sequentially on the display