26
Symptom Itemstocheck Resolution
Lamp is not
turned on.
•
Check the failure of the lamp.
•
Replace the lamp
•
Check the contact status of connector and
terminals
•
Replace the PCB.
Check the levelness of the set.
•
Adjust the levelness.
Check deformation of the safety lever.
•Replacethesafetylever.
Check if the sync motor wire is tight.
•Replacethesyncmotor.
Check for alien substances in the discharge
valve bellows.
•
Remove alien substances.
Check operation of the sync motor and the
levelclutchbycheckingspindrying(d2)in
test mode.
•
Ifyoucanmovetheleverswitchto
thespindryinglocation(5mmor
more) then replace the sync motor.
•
Ifnormal,thendisassemblethe
rotor and check for damage in the
coupling and replace the spring.
