Daewoo Markası'nın Ürünleri

3. Error displays and causes of errors

Error display Details

•

This error occurs when the water level sensor frequency is over 30 KHz or below 15

KHz and also when the frequency is increased suddenly by more than 1.44 KHz in

foursecondsafterllingupwater.

➔

Water level sensor hose is off the position. (This feature will be applied later

after review in the future)

•

This error occurs if the door lock is not set to open or close when the door lock

solenoid is operated more than 10 times.

•

This error is cleared when the door is open.

•

This error indicates that the door opens during the operation of the washing machine.

Procedure to handle this error

Close the door then the lock is engaged and the course continues.

•

This error indicates that the safety switch is open right before entering the spin stage.

•

This error occurs when water is not drained for more than 15 minutes.

•

This error occurs when the water level sensor frequency does not change by more

than0.08KHzfor10minutesafterthestartofwaterlling,andalsowhenthewater

isnotlledupfor60minutes.

Procedure to handle this error

Open and close the door, check the water valve and water pressure, and press

Start/Pausebutton,thentheerrorisclearedandwaterwillbelledagain.

•

This error occurs when the unbalance switch is activated a third time after

performingtheunbalanceoperation(waterll+wash)twiceduringthespinstage.

Procedure to handle this error

Open the door, arrange the contents evenly, and close the door. Then the error will be

cleared and spinning will be performed again.