52 BSGX4e Business Gateway User Guide
NN47928-102 Release 01.01
3.Change the source parameter to user and the previously entered, user-provided
configuration is used.
> config system dns source user
> show system dns
DNS Settings:
DNS1 192.168.1.2
DNS2 0.0.0.0
Domain
Source user
Show DNS Client Configuration
To see the configuration currently in use by the DNS client, enter the following
command:
> show system dns
DNS Settings:
DNS1 192.168.134.160
DNS2 0.0.0.0
Domain wan.com
Source dhcp
Check DNS Server Accessibility
After the configuration is complete, ensure that the DNS server is accessible. To do
this, ping a device by name. The ping command references the DNS server to
translate the name to an IP address.
In the following example, assume that the domain is configured as wan.com. The
example pings a SIP server on the LAN named sipserver.
> ping sipserver
Pinging sipserver.wan.com (192.168.134.162): 56 data bytes
Reply from 192.168.134.162: bytes=56 icmp_seq=0 time<1ms
Reply from 192.168.134.162: bytes=56 icmp_seq=1 time<1ms
Reply from 192.168.134.162: bytes=56 icmp_seq=2 time=5ms
Reply from 192.168.134.162: bytes=56 icmp_seq=3 time<1ms
----- sipserver.wan.com ping statistics -----
4 packets transmitted, 4 packets received, 0.0% packet loss
Round-trip times: min/avg/max=0/0/5ms
Initial Settings
To list the current configuration of the unit, enter a dump command.
