BSGX4e Business Gateway User Guide 55
Release 01.01 NN47928-102
Initial Setup
SSH server Enabled.
AuthMethods: keyboard + password +
publickey
Services: ssh + sftp
“SSH Server” (page 36)
Web server Enabled. “Web Server” (page 38)
Logging Audit logging: enabled (show audit log)
Remote module logging (udplog and
syslog): disabled.
Local module logging: enabled (show
logging internal)
“Audit Logging” (page 324)
and “Module Logging”
(page 325).
Watchdog
reset timer
Enabled. “Watchdog Reset Timer”
(page 49)
SNTP
client
Enabled because of DHCP. “Setting the Time through
an SNTP Server” (page 48)
DNS client Enabled because of DHCP. “DNS Client” (page 50)
SNMP Enabled. “SNMP Agent” (page 347)
NAT Enabled on the WAN interface (eth0). “Configuring NAT” (page
134)
ALG Enabled. “ALG Configuration” (page
140)
IDS Enabled. “IDS” (page 140)
DHCP server Enabled. Configured on the eth1 inter-
face, when a LAN device requests an IP
address, the server can assign an
address from its address pool
192.168.1.50-192.168.1.250/24.
“DHCP Server” (page 309)
DHCP relay Disabled. “DHCP Relay” (page 312)
DNS relay Disabled. “DNS Relay” (page 313)
TFTP relay Disabled. “TFTP Relay” (page 316)
SNTP relay Disabled. “SNTP Relay” (page 315)
SIP session
controller
Disabled. “SIP Session Controller”
(page 271)
SIP gateway Disabled. “SIP Gateway” (page 278)
MGCP session
controller
Disabled. “MGCP Session Controller
Configuration” (page 215)
MGCP gateway Disabled. “MGCP Gateway” (page
222)
GoS traffic
protection
Disabled. “GoS Configuration” (page
181)
RIP daemon Disabled. “Starting the RIP Daemon”
(page 126)
Table 14. Initial Settings (continued)
