BSGX4e Business Gateway User Guide 33
Release 01.01 NN47928-102
Connecting to the Device
3. Enter the password for the user account.
Password:
The initial password is PlsChgMe!; it may have been changed during
installation.
4.System information is displayed, ending with the command prompt that ends
with the greater than (>) symbol.
5. After the command prompt, enter the following command:
> show interface ip
A display similar to the following appears:
"eth0" info:
Interface eth0
Flags (A843) < UP BROADCAST RUNNING SIMPLEX LINKUP MULTICAST
IP Address/Mask 172.16.1.217/255.255.255.0
MTU 1500
DHCP off
Lease obtained N/A
Lease expires N/A
MAC Address 00:15:93:FF:00:F8
Speed FULL100
Configured speed AUTONEG
"eth1" info:
Interface eth1
Flags (A843) < UP BROADCAST RUNNING SIMPLEX LINKUP MULTICAST
IP Address/Mask 192.168.1.1/255.255.255.0
MTU 1500
DHCP off
Lease obtained N/A
Lease expires N/A
MAC Address 00:15:93:FF:00:F9
Speed N/A
Configured Speed N/A
6.Find the IP address on the IP Address/Mask line for the interface to be used:
If connecting to the BSGX4e through the WAN, use the eth0 address.
If connecting to the BSGX4e through a LAN port, use the eth1 address.
Remote Administration Services
This section describes how to configure servers that allow for remote administration
of the BSGX4e unit. These servers are:
Telnet server
Secure Shell (SSH) server
Web server
Secure Socket Layer (SSL) server
